Name and ModelF63B3Flow-type softening valve4.5 m3/hThe following are technical parameters:

●Controller mode---------------------------------------------Flow type/Downstream regeneration

●Applicable water pressure-----------------------------------------------0.15-0.6MPa

●Power adapter-----------------------------------------------100-240V/50-60Hz

●Applicable water temperature------------------------------------------------5--45℃

●Large water production capacity----------------------------------------------4.5 m3/h

●Adapt to the diameter of the softening tank(in)------------------------------------6-18″

●Inlet and outlet------------------------------------------------1″M(External teeth

●Drain outlet--------------------------------------------------1/2″M(External teeth

●Salt suction port--------------------------------------------------3/8″M(External teeth

●tube--------------------------------------------------1.05 ″OD (26.7mm)

●Base(Connection port with the can)----------------------------------------2-1/2″8NPSMValve body material: ReinforcedABSorPP0There are two product features for customers to choose from:

■The end face sealing plate has no leakage when opening and closing, and its mechanical performance is reliable.

■It has a manual operation function: that is, when there is a power failure or the controller fails to work properly, the handwheel can be used for operation.

■It has a keyboard lock function: The keyboard will automatically lock after one minute. If you operate again, you need to unlock it again to prevent accidental operation.

■LEDDynamic color bar display: A flashing color bar indicates that it is in operation, otherwise it indicates that it is in regeneration.

■Long-term power outage warning: If the power outage lasts for more than three days and the clock keeps flashing, it indicates that the current time needs to be reset. The reset time remains unchanged.

■When regenerating the single-tank control valve, no water comes out of the outlet.

■With signal output ports: The normally open, normally closed and common three port leads in the electronic control mainboard are externally connected to solenoid valves or booster pumps.

■Has flow delay typeA-01Or traffic immediate-typeA-02There are two traffic modes, which can be changed through the setting of parameters within the program.

■The large interval regeneration days can be set: It indicates that no matter how much flow is set or operated, exceeding the large regeneration days0-40Regeneration will be initiated before the flow rate reaches the set value. Product accessories

Number of names

Number of names2-1/2″Base sealing ring￠73×￠5.3)1a1/2″Drain hose fitting  1A drainage flow-limiting gasket1a3/8″Salt-absorbing hose fitting  1A water injection flow-limiting gasket (red)1A liner  1a