I. Standard Working Process of Fully Automatic Water Softener

Work(Sometimes it is called water production, the same below)Backwashing, salt absorption(Regeneration)Slow rinse(Replacement)Five processes of quick rinse. All the processes of different water softening equipment are very similar. However, due to the differences in actual processes or control requirements, there may be some additional procedures. Any water softening equipment based on sodium ion exchange is developed on the basis of these five processes(Among them, the fully automatic water softening equipment will add a brine recharging process).

FLECKPerformance features of (Fulaike) centralized control valve:

◆PENTAIR FLECKThe piston valve core produced not only has outstanding hydraulic performance, but is also strong, wear-resistant and corrosion-resistant. The lead-free brass valve body is harmless and has a long service life.

◆The valve core has a clever design. The core component, composed of pistons, sealing rings and partition grids, not only has excellent hydraulic performance, but is also sturdy, wear-resistant and corrosion-resistant. The brass valve core is firmly covered with a polytetrafluoroethylene surface layer that has low friction resistance and is wear-resistant. These features ensure the reliable performance and long service life of the control valve.

◆The regeneration program can be automatically started according to the flow rate setting. The operator only needs to add salt to the salt tank regularly, and the rest of the work will be automatically completed by the soft water equipment. The equipment has a low failure rate, a long service life and can ensure water quality100%In good condition.

◆The periodic water production volume can be adjusted at will, and the time of each regeneration step can be flexibly adjusted.

Iii. Performance Characteristics of Fully Automatic Water Softener

Fully automatic water softeners can be classified into various series such as time-controlled type, flow-controlled type, and continuous soft water supply system type. They come in multiple combination forms, including single-valve single-tank, single-valve double-tank, double-valve double-tank in parallel, and large multi-valve multi-tank in series, to meet users' diverse water usage needs. The flow type is fully automatic regeneration with the set flow control. The flow rate can be set according to the different resin filling volume and water quality conditions. The time type is based on the resin filling volume and water quality conditions, combined with the specific hourly demand to convert the time, and is controlled by the set time for fully automatic regeneration.7Heaven or12The regeneration cycle can be set as needed within a day.24The regeneration time can be chosen at will within hours. The fully automatic soft water equipment control system technology is formed, easy to operate, reliable in operation, and microcomputer-controlled, making its operation more convenient and management easier.

1.It features a high degree of automation and stable operating conditions.

2.The program control device operates accurately and reliably, replacing manual operation and achieving automatic conversion of all links in water treatment.

3.Low energy consumption and economical operating costs. Due to the overall reasonable design of the softener, the exchange capacity of the resin is fully exerted. The equipment adopts jet salt suction instead of salt pumps, reducing energy consumption.

4.The equipment has a compact structure, occupies a small area, saves infrastructure investment, and is easy to install, debug and use. The performance of the operating components is stable.

Iv. Technical Specifications of Fully Automatic Water Softener (Water Softening Equipment

electricity  Source220V/50Hz

work  Rate10-35W

Water production capacity (single unit)0-50m3/h

Work pressure0.2-0.5MPa

Operating temperature2-50℃

Inlet water hardness≤8mmol/L

Effluent hardness≤0.03mmol/L

Operation procedure: Automatic program control

Valve body material: High-strength plastic or lead-free copper alloy

Tank material: Wound fiberglass reinforced plastic or carbon steel with internal anti-corrosion and stainless steel

Control mode: Time type, flow type or powerless hydraulic drive type

Layout form: Single tank or multiple tanks in parallel

Regeneration method: Downstream flow/Countercurrent regeneration

Interface form: Pipe thread/ABS"Flange

Ion resin: Strongly acidic cation exchange resin

Reclaimed water consumption≤2%×Water production volume

salt   Consumption≤160g/l