Product Introduction

Fleck control valveFleck 2510The valve core of the system has a clever design. The core component, composed of pistons, sealing rings and partition grids, not only has excellent hydraulic performance, but is also sturdy, wear-resistant and corrosion-resistant. The brass valve core is firmly covered A polytetrafluoroethylene surface layer with low friction resistance and wear resistance makes the valve core the power component when the valve is in operation. Fleck soft water valveFleck 2510It features non-corrosiveness, fiber-reinforced polymer construction and excellent flow rate.19 GPMContinuous24 GPMIt has the characteristics of peaks and so on. These features make the performance of the control valve reliable and its service life long.

Product features

• The five-step regeneration process includes backwashing, salt suction, slow rinsing, fast rinsing, and salt tank water replenishment. The time can all be adjusted.
  The hydraulic balance type piston, sealing ring and separator grid that have passed the time test regulate the water flow and regeneration.
  The valve body is corrosion-resistant and UV-resistantNorylMaterials.
  Continuous water inflow during optimal operating conditions4.3 /hPeak inflow volume5.4 /h.
  It can be configured16"The diameter softening system and filtration system.
  Optional7or12The regeneration can be triggered by time within days. It can also be triggered by flow or configured for manual operation. The controller can be selected as either electromechanical or electronic type.
  It can be used as a backwash filter valve.
  It can be regenerated countercurrent.
  Traffic triggers regeneration.
  It can be configured for manual control of regeneration.
  Environmentally friendly cover.
  A bypass piston without hard water can be equipped.
  Auxiliary switch.

Product real photos

Product parameters

Explanation①The inlet water pressure is0.35MPaThe pressure drop is0.1MPaTheoretical values under certain conditions.②The inlet water pressure is0.35MPaThe pressure drop is 0.175MPaTheoretical values under certain conditions.