10"ppCotton filter element｜20"ppCotton filter element｜40"ppCotton filter element｜30"ppCotton filter element 1. Melt-blown filter element

material mass : PolypropylenePP)

" constitutive : Meltblown filter elements are formed by melting polypropylene chips at high temperatures, jetting, pulling and receiving them. They are a new generation of filtration materials that replace traditional filter elements.

Performance features

(1The filtration efficiency and filtration accuracy are high. The pore density of the filter element is uniform, and the filtration efficiency reaches99％That's all.

(2This product features low filtration resistance, large flow rate, large dirt-holding capacity and long service life. During the production process, the fiber diameter and gap can be adjusted. The inner layer of the filter element's micro-pores is smaller and the outer layer is larger, which increases the flow rate and dirt-holding capacity. The filter element is less likely to clog and its service life is prolonged.

(3It has a high degree of self-cleanliness, does not pollute water quality, and is resistant to acids, alkalis, organic solvents and corrosion.

(4The strength is high, and the water pressure difference between the inlet and outlet of the filter exceeds0.4Mpa The filter element will not deform when the temperature exceeds90℃At that time, the filtration efficiency will not decrease.

Precautions

(1Please select the filter element based on the precision of the filtered liquid and the impurities it contains. For viscous liquids, two-stage filtration can be adopted, with the first stage being coarse filtration to reduce resistance and extend the service life of the filter element (generally)3-4(Multiple).

(2Please install the filter element correctly. If water contamination is found during filtration, carefully check whether the filter element is skewed and whether both ends are strictly aligned and pressed tightly.

Melt-blown filter elementPP"Absorbent cotton filter elementTZM)

Filter element name, filter element length

10Inches20Inches30Inches40"Inch"

254mm,508mm,762mm,1016mm

Processing flowt/h)0.5.1.0.1.5.2.0

Filter element specification

Meltblown type (ordinary type, tape.PPSkeleton type, wire-wound type (tapePPFrame, stainless steel frame

Filter element interface

Meltblown type (ordinary flat nozzle,222"Insert226"Click in

Filter element accuracyμm"Micrometer

1,5,10,25,50,75,100,150,200

Filter element diametermm)

Outer diameter62~65 Inner diameter28~30

Pressure differencekg/cm2)

Replace the pressure difference1.03High pressure difference2.41

High temperature

PP(90℃"TZM(120℃)

Remarks

The pore size and length of the filter element can be produced according to the user's needs