Product features

1.Automation of water softening process: Introducing the American Fleck controller, through the synchronous motor drive program control device, the entire process of ion exchange and resin regeneration is automated. Just add the regenerant regularly, and continuous or intermittent water supply can be achieved under fully automatic conditions.

2. The overall design of the water softener is reasonable, enabling the effective working exchange capacity of the resin to be fully utilized.

3. Stable water output: The American Fleck controller can accurately control the flow rate, regeneration time and the degree of each regeneration stage, ensuring stable water output.

4. Labor-saving: No need for dedicated personnel to stand by. Easy to install. It can be installed and used on the same day.

5. Water-saving: The water production rate of the water softener has reached98%That's all.

6. Energy-saving: It adopts the siphon regeneration principle and does not require a salt pump. Its power consumption is only equivalent to that of manual water softening equipment 1%.

7. Small floor space: Only the floor space of the resin tank and the salt tank needs to be provided, saving the space occupied by pipelines and salt pumps.

8. Convenient adjustment: Users can adjust the regeneration cycle and regeneration time according to their actual situation and needs by themselves.

9. It adopts electronic control mode and has a power-off memory function. It can query historical records such as peak water production time and total cumulative water production volume, and analyze water usage.

Low operating costs Due to its high degree of automation, the softener can adapt to changes in water volume, accurately measure the water production volume, and precisely measure the amount of regenerant used, avoiding the unnecessary waste of regenerant during regeneration and saving a large amount of labor costs at the same time.

1. The foundation needs to be level, and a common cement surface is fine. There should be a floor drain or drainage ditch near the water softener.

2. Raw water hardness<8mmol/L(namely400mg/LIf the hardness is greater than8mmol/LPlease make a declaration in advance).

3. Inlet water pressure: Maintain continuous pressure0.2～0.6Mpa(It includes the water production process and the regeneration process)(Such as<0.2MpaA pipeline pump must be added); When the incoming water pressure is insufficient(Or when there is no constant pressure)A pressurizing pump needs to be equipped, but the on and off of the pump must be controlled. Generally, the control of a pump requires two types of signals: one is the liquid level height signal of the softened water tank, and the other is the signal indicating whether the control valve is undergoing a regeneration process.

4. Operating temperature2～50℃.

5. Power supply220V 50Hz.

6. Before the raw water enters the water softener, users should addYThis type of filter prevents impurities in water from blocking the valve body.

7. A pressure gauge should be installed on the water inlet pipeline, and a bypass valve should be installed between the inlet and outlet pipelines.