〖The United StatesFLECKSoftening centralized controller〗

　　The fully automatic water softener features a piston-type valve core that not only has outstanding hydraulic performance but is also sturdy, wear-resistant and corrosion-resistant. The lead-free brass valve body is harmless and has a long service life. Fully automatic water softeners can be classified into various series such as time-controlled type, flow-controlled type, and continuous soft water supply system type. They come in multiple combination forms including single-valve single-tank, single-valve double-tank, double-valve double-tank in parallel, and large multi-valve multi-tank in series, meeting the different water usage requirements of boiler soft water equipment.

　　〖The United StatesAUTOTROLMulti-way valve controller〗"Atuzu" fully automatic water softener(Sodium ion exchanger)The working principle

　　The sensor flowmeter on the outlet pipe of the sodium ion exchanger randomly collects the output water volume information and promptly inputs it into the computer. After storage and calculation, it issues instructions to the multi-way servo valve or solenoid valve to perform corresponding operations. At the same time, the relevant information is synchronously fed back to the microcomputer.When the system needs to be regenerated, the computer controls the solenoid valve to cut off the water outlet pipe passage, and the preset program starts at a fixed time to enable backwashing－－Salt absorption－－Rinse－The water injection and other processes were carried out accurately and without error. The microcomputer can be optimized and preset according to the user's needs. It can randomly display: cycle set water output, remaining water volume, water flow per hour, cycle salt consumption, the time of each regeneration and the current working mode. Meet the different demands during operation,At any time, the operation of the fully automatic water softener can be switched to manual regeneration to meet the different requirements of the operating conditions of the water softening equipment.

　　〖AUQAMATICAutomatic water supply treatment system - valves, distributors, controllers, ion exchangers〗

　　The Jacques automatic water treatment system is a product of Osmonis in the United StatesOSMONICSThe new generation of large-scale fully automatic water softening treatment equipment developed by combining the diaphragm valve distribution control technology of the group with traditional water treatment processes.

　　The working principle of the fully automatic water softener

　　When the raw water containing hardness ions passes through the resin layer of the exchanger, the calcium and magnesium ions in the water are exchanged with the sodium ions in the resin. The resin adsorbs the calcium and magnesium ions while the sodium ions enter the water. Thus, the water flowing out of the exchanger is softened water with the hardness ions removed. As the exchange process continues, in the resinNa+When all are replaced and reach saturation, the exchange function is lost, and at this point, industrial use is adoptedNaCl(Carbon-free)The solution regenerates the resin and adsorbs itCa2+,Mg2+After being replaced, the resin re-adsorbed sodium ions and restored its softening exchange capacity.

　　Features of the fully automatic water softener equipment

　　1.It features a high degree of automation and stable operating conditions.

　　2.The program control device operates accurately and reliably, replacing manual operation and achieving automatic conversion of all links in water treatment.

　　3.Low energy consumption and economical operating costs. Due to the overall reasonable design of the softener, the exchange capacity of the resin is fully exerted. The equipment adopts jet salt suction instead of salt pumps, reducing energy consumption.

　　4.The equipment has a compact structure, occupies a small area, saves infrastructure investment, and is easy to install, debug and use. The performance of the operating components is stable.

　　Inlet water requirements

　　Residual chlorine＜0.1ppm Turbidity ＜2 Fe＜0.3ppm

　　Mn ＜0.3ppm Total salt content＜500ppm

　　Technical indicators

　　Work pressure0.15-0.6MPa

　　Operating temperature5-50℃

　　Power supply220V,50Hz

　　Power≤10W

　　Water production capacity1-110m3/h

　　Valve body material: High-strength plastic or lead-free copper alloy

　　Tank material: Wound fiberglass reinforced plastic or carbon steel with internal anti-corrosion and stainless steel

　　Control mode: Time type, flow type or powerless hydraulic drive type

　　Effluent hardness≤ 0.03mmol/L(Hardness of raw water≤8mmol/Lwhen)

　　Regeneration method: co-current or counter-current

　　Interface form: Pipe thread/ABS"Flange

　　Resin: Imported

　　Reclaimed water consumption≤2%×Water production volume

　　Salt consumption≤100g/mol

　　Installation conditions: No separate equipment foundation is required A generally flat cement floor is fine, around the equipment1Drainage ditches or outlets should be set up within a range of one meter.