The wide application of ion exchange equipment in the chemical industry-Yuanlai Water Treatment

font: Big Middle Small

The wide application of ion exchange equipment in the chemical industry

Released Date: Aug 25,2015 Article Source: Yuanlai Water Treatment

The ion softening water equipment of Beijing Yuanlai Water Treatment Equipment Co., Ltd. can meet different water quality requirements such as 18MΩ.cm, 15MΩ.cm, 10MΩ.cm, 10μs, and 5μs according to different processes. The processes described below are all full ion exchange processes. 10μs ion exchange process: quartz sand filter + activated carbon filter + precision filter + cation exchanger + anion exchanger 5μs ion exchange process: Quartz sand filter + activated carbon filter ++ precision filter cation exchanger + anion exchanger + cation exchanger + anion exchanger 10MΩ.cm - — 15MΩ.cm ion exchange process: quartz sand filter + activated carbon filter ++ precision filtration

　　The ion softening water equipment of Beijing Yuanlai Water Treatment Equipment Co., Ltd. can meet the water quality requirements of different processes18MΩ.cm,15MΩ.cm,10MΩ.cm,10μs,5μsSuch as different water quality requirements.

　　The processes described below are all full ion exchange processes.

　　10μsIon exchange process

　　Quartz sand filter+Activated carbon filter+Precision filter+Cation exchanger+Anion exchanger

　　5μsIon exchange process

　　Quartz sand filter+Activated carbon filter++Precision filter cation exchanger+Anion exchanger+Cation exchanger+Anion exchanger

　　10MΩ.cm-15MΩ.cmIon exchange process

　　Quartz sand filter+Activated carbon filter++Precision filter cation exchanger+Anion exchanger+Cation exchanger+Anion exchanger+Mixed bed system

　　18MΩ.cmIon exchange process

　　Quartz sand filter+Activated carbon filter++Precision filter cation exchanger+Anion exchanger+Cation exchanger+Anion exchanger+Mixed bed system+SMBFinely polished mixed bed

　　Note: When the resin absorbs a certain amount of ions and reaches saturation, it needs to be rinsed with acid or alkali for regeneration. The regeneration cycle is determined by the quality of the raw water and the amount of water used. The required regeneration solutions are divided into hydrochloric acid and alkali. Hydrochloric acid is used to regenerate cations. One liter of hydrochloric acid is mixed with one liter of cation(Concentration of hydrochloric acid30%Above)Then it is diluted through a jet injector, with a concentration of approximately6%Let it wash slowly for about half an hour, then rinse the acid solution clean again. Generally adopted99%The concentration of caustic soda flakes mixed with water is approximately30%Left and right, let it cool down, then dilute it into the anion resin layer through the jet injector and discharge it in the middle drain until about half an hour. Then rinse it with a large amount of raw water until the alkaline solution is thoroughly rinsed. Generally50About a minute,Regeneration is complete.

Keywords: Water Softening Equipment Automatic Water Softener Reverse Osmosis Equipment Manufacturer of Water Treatment Equipment

Prev : Supervision and Administration Rules for Boiler Water Treatment (2008 Edition)

Next : Workflow chart of water purification equipment

Recommend products

: EDI ultra-pure water system

Yuan LaiEDIThe ultra-pure water equipment uses electro-deionization technology.EDIElectrodeionization is a water purification method that combines the dual advantages of electrodialysis and ion exchange. It does not require acid-base chemical regeneration and can continuously and stably prepare high-purity ultrapure water. Under the action of a direct current electric field, ion separation in water is completed. At the same time, water is electrolyzed to generate hydrogen ions and hydroxide ions, achieving automatic regeneration of the resin without the need to stop the machine for manual regeneration. The pre-treatment combined with reverse osmosis can prevent oxidized substances from damaging the resin, ensuring stable effluent quality and widely meeting the high-standard water usage requirements of various industries.

: Non-negative pressure water supply equipment

The non-negative pressure water supply equipment can be directly connected to the municipal water supply network, making full use of the residual pressure of the original network for superimposed water supply. Fully enclosed operation does not require the construction of a domestic water tank, eliminating secondary pollution. Intelligent variable frequency voltage stabilization, energy-saving, quiet and easy installation, it is the preferred equipment for secondary water supply in high-rise residential buildings and commercial buildings.

: Constant pressure water supply equipment

Constant pressure water supply equipment is widely used in central air conditioning, floor heating, industrial closed-loop water circulation, and boiler systems. It integrates automatic pressure stabilization, automatic water replenishment, automatic exhaust, pressure relief and buffering functions. It stabilizes the pressure in the pipeline network, eliminates abnormal sounds caused by air blockage, and prevents damage from negative pressure and water shortage in the pipeline. It is an essential supporting equipment for HVAC and circulating water systems.