Modern families are paying more and more attention to water health. Besides drinking water, domestic water has also received considerable attention. The clothes get yellower after washing, the showerhead gets clogged with scale, and the water rusts seriously... This is all caused by the hardness of the tap water used at home being too high. In fact, it's quite simple to solve these problems. Just a household water softener can do it.

      Water softeners can effectively solve problems such as scale in tap water, and thus have gradually gained favor among many families.

1. Understand the integrated water softener

 Household water softener: It mainly removes calcium and magnesium ions from water through ion exchange resin to reduce water hardness. When the raw water passes through the surface of the resin, the calcium and magnesium ions in the water exchange with the sodium ions attached to the resin surface. The water flowing out of the water softener is soft water without scale. When there are no more sodium ions on the surface of the resin that can exchange with calcium and magnesium ions, it indicates that the resin is saturated. At this point, the resin needs to be regenerated to restore the full adhesion of sodium ions on its surface. This process is the resin regeneration process.

       The process of the water softener is fully automatic and does not require manual operation. Compared with tap water, soft water has a very distinct taste and feel. It has a high oxygen content and low hardness, which can effectively prevent kidney stones, reduce the burden on the heart and kidneys, and is beneficial to health.

　　Integrated type: This is a water softener that integrates the control system, salt tank and all components. It is easy to operate, equipped with both automatic and manual functions, runs automatically on a daily basis, has a large water production capacity, is convenient to use, and can meet the water usage requirements of families. It is widely applicable to families, service and office places, providing a solution for the soft water needs of families and enterprises and institutions.

Ii. Household Water Softener - Energy-saving and Environmentally friendly

Experiments show that under the same usage conditions, after two years, gas water heaters that use soft water are more effective than those that use hard water(Hardness170PPM)Save29%The gas consumption of an electric water heater is more economical when using soft water than hard water23%The power consumption.

Iii. Household Water Softener - Beauty and Skin Care

When taking a bath with tap water, people often find that their skin feels tight and even itchy after the bath. This is because hard water, when it comes into contact with the skin, blocks the pores and becomes a breeding ground, causing symptoms such as cracking, itching and dry skin. However, if softened water is used for bathing, the pores can be thoroughly cleaned, and the skin can breathe freely, which is beneficial for removing the keratin in the pores and preventing skin aging.　

Iv. Features of the Integrated Water Softener

1"Time"/The dual-program control of flow can effectively prevent unstable water output and excessive consumption of water, electricity and salt.

2The large-flow valve head meets the needs of the whole family for high-flow domestic water, and is stable and durable.

3High-quality uniform particle resin, with strong exchange capacity and not easy to break.

4The hardness of the water output can be adjusted according to the user's requirements. While effectively solving the problem of scaling, it retains an appropriate amount of calcium and magnesium ions beneficial to human health and reduces the content of sodium ions harmful to the human body in the water. The decisive function of the water softener makes it a truly healthy household water softener.

5Low energy consumption: The water, electricity and salt consumption of the equipment is approximately the same as that of similar products30~60%Low consumption, saving operating costs.

6Good material: The control valve body is made of lead-free brass, which is corrosion-resistant and anti-pollution. The materials of the exchange tank include fiberglass reinforced plastic, stainless steel, etc. (Double-reinforced fiberglass reinforced plastic tank, leak-proof, impact-resistant, with the outer layer of fiberglass wound and double-layer thickening at the tank neck to prevent leakage). The materials of the salt bucket includePEPlastic can meet all kinds of demands.

7Economical and practical: Attractive appearance, compact design, and compact equipment structure, occupying a very small area, and flexible installation location.

8Simple installation: Connect the pipes as shown in the diagram during installation. No fixation is required. It is simple and easy to operate. The equipment operates automatically without the need for manual operation.

9Inlet water requirements: Household tap water or well water Never use it in excess40Hot water at a certain degree. Operation mode: It adopts fully automatic control mode, operates automatically without manual operation, and has low power consumption, approximately per month1-2Electricity consumption per kilowatt-hour. Applicable families: Families with high water hardness (high calcium and magnesium ion content in the water source) and those who need to soften the water (remove calcium and magnesium ions from the water).

V. Product Structure of the Integrated Water Softener

The three major components of a water softener equipment:

1The resin tank and resin of the water softener equipment are the essential components for filtering hard water into soft water. Through the principle of ion exchange, potassium and sodium ions replace calcium and magnesium ions, and the hard ions in the water are removed.

2The salt tank of the water softener equipment, household softened salt and salt suction valve - after the resin fails, it is replaced by high-concentration brine to regenerate the resin, and the water softener equipment can be used repeatedly for a long time.

3The control valve of the water softener equipment - realizes the automation of the regeneration process and various humanized value-added functions of the household water softener. Control the entire operation and regeneration process.

Vi. Precautions for the Use of Water Softener

1.The working temperature range of the water softener is maintained at2C-50CTake precautions against freezing in winter.

2, When the water softener is not in use for a long time, close the main valve to cut off the water and electricity supply. When in use, if it is electrically controlled, first connect the power supply, adjust the time and drain the water3Minutes.

3.The optimal inlet water pressure is0.2-0.5MPaHigher than0.5MPaPressure addition and subtraction device.

4.Non-iodized salt should be added to the salt tank, but the amount should not exceed2/3Height of the salt tank

5.The consumption of regenerated salt is approximately1kg.