If the water used in circulating heating systems, industrial water supply boilers, etc. is not treated and operates for a long time, it will lead to blockages in pipelines and equipment, the deposition of scale and sludge that act as thermal resistance, and the growth of algae. As a result, the heat transfer of the system will inevitably decline, the load on the compressor will increase, causing waste of water and electricity, shortening the service life of equipment, and even making it impossible to ensure the operation of the system.

      Air conditioning system, heating water supply system, industrial cooling system, heat exchange system, industrial circulating water system, hot water boiler water system

      -- Electronic water processor

      -- Cyclone desander

      -- Full-process water processor

      -- Side-stream processor

I. Introduction to the Multi-Functional Water Processor

       Produced by Beijing Yuanlai CompanyYLSeriesMulti-functional cyclone desanderElectronic water processor, full-process water processorSide-stream water processorIt can not only reasonably control energy consumption, reduce operating costs, but also ensure that water quality meets standards,It can also simplify certain process flows and reduce the project cost.Long service life and can be used continuously15More than one year.

        Multi-functionalYLThe series of water processors are widely used in water systems such as cooling cycles, heat exchangers, and boilers. It is estimated that compared with using chemical methods, equipment investment can be saved60％～70％Water conservation 80％Improve efficiency18％That's all. 

       It has been widely applied in: heating water supply systems, air conditioning circulating water systems, industrial cooling systems, heat exchange systems, domestic water systems, etc.

Ii. Electronic Water Processor

1Working principle

　　When the electronic water processor is in operation, water flows into the instrument through the water inlet and, under the influence of high-frequency electromagnetic fields, forms electromagnetically polarized water. In addition, electromagnetically polarized water can also kill bacteria and algae in water and inhibit the reproduction of microorganisms. Due to the inhibition of metal dissociation on the vessel wall, it has an anti-corrosion effect on the scale-free system, and thus it also has the function of eliminating algae.

2Scope of application:

        - Cooling water systems for industries such as construction, chemical engineering, metallurgy, coal, rubber, light industry, pharmaceuticals, and refrigeration;

        -  Applicable toAir conditioning cooling water systemChilled water andHeating water systemWater quality treatment and control of circulating water, tap water, surface water, groundwater, seawater and hot water;

        - Hot water boiler water systemDomestic water supply system, heat exchange system.

Iii. Cyclone Desander

1Working principle:

　　Based on the principles of centrifugal sedimentation and density difference, when water flows tangentially into the desander from the inlet under certain pressure, it will generate intense vortices. Sand with higher density settles to the bottom and is discharged from the bottom sand outlet. The clear water with low density is filtered upward through a stainless steel filter screen for the second time at the outlet, thus achieving the purpose of sand removal.

2Product features:

1It does not consume energy and has a good sand removal effect, making it particularly suitable for systems with a high sand content.

2It has a low cost, is easy to install and operate, runs reliably, has a small volume, a large water treatment capacity and occupies a small area. Proper internal treatment ensures the equipment's own impact resistance, wear resistance and corrosion resistance.

3. It has solved the problem that traditional cyclone (sand and dirt) removers have difficulty in treating light specific gravity contaminants such as suspended solids, leaves, and paper scraps.

Four. Full-process water processor

Full-process water processorIt is a comprehensive processor developed in response to the four common problems in various circulating water systems: corrosion, scaling, bacteria and algae, and deterioration of water quality. It replaces the treatment process that requires multiple devices with a single device, thus replacing the traditional treatment methods. It has the functions of comprehensive water quality optimization treatment, scale prevention, anti-corrosion, algae elimination and ultra-clean filtration.

　　  Combining the powerful and algae-killing capabilities of ultraviolet rays, it makes up for the shortcomings of radio frequency technology in algae-killing under conditions of high temperature, high humidity and poor water quality.

V. Side-stream processor

      The circulating water bypass water processor is developed on the basis of the original full-flow water processor and is used to replace the traditional "dosing" method+A new type of circulating water quality treatment equipment with "side filtration"; It has the comprehensive functions of scale prevention, scale removal, algae control and filtration and sewage discharge.