Beijing Yuanlai Water Treatment Company, dedicated to productionSoftened water equipmentWith after-sales equipment, the water quality is stable, reliable and widely applicable.

　　1First of all, what kind of system do you need to supply to use softened water?1Heating2Cooling and water replenishment3Skill water4Steam boiler5Steel training work6Chemical and pharmaceutical work.

　　2The water usage time of the sodium ion communicator system: that is, the working time/Hourly water consumption/Average value/Peak.Softened water equipmentIs there a continuous demand for water supply? If required, choose the dual-bed centralized control or dual-control dual-bed series; otherwise, the single-valve single-tank series can be selected.

　　3Total hardness of source water: The water sources are municipal tap water, groundwater and surface water sources,You need to supply the total hardness of the raw water in the application area. For a certain typeSoftened water equipmentFor instance, if the hardness of the raw water is high, the periodic water production volume must be relatively reduced, which leads to the repeated regeneration of the soft water equipment. Relatively reduce the service life of the resin. To avoid such situations, the volume of the resin should be increased, which means choosing an enlarged typeSoftened water equipment.

　　4The required unit flow rate of soft water(Tons of/"Hour). This is determined by the nature of the user's equipment and the requirements, and we select the reasonable type based on thisSoftened water equipment.

　　5The setting of the periodic water production capacitySoftened water equipmentAfter the type is set, the theoretical cycle water production can be determined based on the hardness of the raw water and the communication working capacity of the resin used(Tons of).

　　1. Fully automaticSoftened water equipmentSelection Instructions

　　1Fully automaticSoftened water equipmentController: Selected from the United StatesFLECKFleckAUTOTROLArtuzu automatic control valve.

　　2Resin tank: Multiple options available: DomesticRFPTanks, stainless steel tanks, metal-lined plastic tanks(PEInner lining)

　　3Fully automaticSoftened water equipmentWork control mode

　　L- Flow type: It automatically resumes when the prepared water volume reaches the set value and can be applied to the soft water preparation of water supply systems.

　　S- Time-type: It uses time as the control method for regeneration measurement, suitable for water supply in systems with stable water consumption, and the recovery and regeneration cycle is24Hours.

　　4Available device combinations:

　　⑴- Single control single bed: Intermittent water supply during the recovery period2For hours or continue to supply raw water(Hard water bypass).

　　⑵- Single-controlled dual-bed: Water supply replacement, one in use and one as backup.

　　⑶- Dual-control dual-bed: Water supply replacement, one in use and one as backup.

　　⑷- Dual-control dual-bed: Supply water simultaneously and replace the regenerative type.

　　⑸- Multi-control and multi-bed: Three or more resin tanks are used in parallel, suitable for large-scale water supply systems.

　　Since its establishment many years ago, Beijing Yuanlai Water Treatment Equipment Company has always put the interests of its customers first, striving to meet their water usage needs as much as possible and achieve their satisfaction. BeijingSoftened water equipmentWe will fully undertake and maintain after-sales commissioning and installation!

　　　Ii. Fully Automatic water Softener

　　• Piston grating - sealing ring plan

　　The valve core of this control system has a wonderful design. Some components composed of pistons, sealing rings and partition grids not only have excellent hydraulic performance, but also are stable, wear-resistant and corrosion-resistant. The brass valve core is firmly covered with a polytetrafluoroethylene surface layer that has low friction resistance and is wear-resistant. When the valve is in operation, the valve core serves as the power component. These features make the control valve reliable in function and have a long service life.

　　• Fully automatic controller

　　The regeneration program can be automatically initiated based on the flow rate or time setting. The operator only needs to add salt to the salt tank on time, and the rest of the work will be automatically completed by the soft water equipment. The equipment has a low failure rate, a long service life and can ensure water quality100%In top form.

　　• High flexibility, suitable for user needs

　　According to the water usage situation, single tank, double tank or double tank system can be selected, which can ensure continuous supply of soft water. The equipment sequence can be selected/Counter-current regeneration system.

　　• Corrosion resistance function

　　The tank body is made of fiberglass reinforced plastic structure, and the valve body is made of lead-free brassNorylIt is harmless and avoids the corrosion of equipment by regenerant and harsh environments.