Installation requirements and layout for water softening equipment-Yuanlai Water Treatment

font: Big Middle Small

Installation requirements and layout for water softening equipment

Released Date: Aug 24,2015 Article Source: Yuanlai Water Treatment

When installing the water softening equipment, it is essential to take into account the space reserved for the installation and commissioning of other equipment in the future. The workshop where the equipment is installed should not be too small. During the operation of the equipment, it is necessary to frequently add salt to it. Consider reserving a position for salt addition. In terms of equipment technology, it should be noted that the water softening equipment must not be installed too close to the boiler (within 4 meters). Otherwise, hot water will flow back into the water softening equipment, damaging it and causing it to be unable to operate or resulting in economic losses. The installation of water softening equipment must be placed indoors, with the indoor temperature ranging from 1 to 45 degrees Celsius. Moreover, as chemical plants contain many acidic substances or emit acidic gases, they must be kept away from these substances. In the connection of the softened water equipment pipeline, there must be drainage pipes and drainage outlets

　　During the operation of the equipment, it is necessary to frequently add salt to it. Consider reserving a position for salt addition.

　　Note on equipment technology: Do not install the water softening equipment too close to the boiler(4Within a meter)Otherwise, the hot water will flow back into the water softening equipment, damaging the equipment and causing it to be unable to operate or resulting in economic losses.

　　The installation of the water softening equipment must be placed indoors where the indoor temperature is lower than1"Degree to45Between degrees, and because chemical plants contain many acidic substances or the emitted gases are acidic, it is essential to stay away from these substances.

　　In the connection of the softened water equipment pipeline, there must be a certain space height between the drainage pipe and the drainage outlet; otherwise, it may cause siphoning. Independent supports should also be used between each pipeline to prevent the equipment from being damaged due to the weight of the pipeline.

　　During the installation process of the equipment, there must be dedicated personnel responsible for the use of electrical appliances and the laying of circuits, and detailed electrical construction drawings need to be formulated. The control switches for using electrical appliances must be consistent, and the circuits must have independent power sockets to ensure that electrical appliances can be used independently.

　　During the installation process, the staff of Beijing Yuanlai Water Treatment Equipment Co., Ltd. will install the regulations firstPVCThe rubber hose is bonded to the water distributor seat, and after the water distributor is installed, it must be tested by the equipment.

　　After the equipment installation is completed, the staff will leave. As a result, equipment malfunctions may occur during the early production operation process. Therefore, our equipment operators need to be able to troubleshoot and maintain them. Daily usage precautions and maintenance of water softening equipment.

　　System design generally does not have problems because once the system is set up, as long as there is no random operation, no issues will arise. If problems do occur, the controller is actually quite easy to set up. You can refer to the relevant equipment manual or consult the technical personnel by phone.

　　The water valve of the equipment may need to be closed first due to improper operation by the operator or maintenance issues.

　　The third type: Softened water equipment requires the use of salt. Many times, when the equipment malfunctions, it is due to the inconvenience of adding salt. This is because the equipment uses industrial salt, which is very dirty. It is advisable to replace the filter cloth regularly to ensure the normal operation of the equipment.

Keywords: Water Softening Equipment Automatic Water Softener Reverse Osmosis Equipment Manufacturer of Water Treatment Equipment

Prev : Water quality requirements for low-pressure boiler water

Next : Design plan for 10 tons of softened water per hour

Recommend products

: EDI ultra-pure water system

Yuan LaiEDIThe ultra-pure water equipment uses electro-deionization technology.EDIElectrodeionization is a water purification method that combines the dual advantages of electrodialysis and ion exchange. It does not require acid-base chemical regeneration and can continuously and stably prepare high-purity ultrapure water. Under the action of a direct current electric field, ion separation in water is completed. At the same time, water is electrolyzed to generate hydrogen ions and hydroxide ions, achieving automatic regeneration of the resin without the need to stop the machine for manual regeneration. The pre-treatment combined with reverse osmosis can prevent oxidized substances from damaging the resin, ensuring stable effluent quality and widely meeting the high-standard water usage requirements of various industries.

: Non-negative pressure water supply equipment

The non-negative pressure water supply equipment can be directly connected to the municipal water supply network, making full use of the residual pressure of the original network for superimposed water supply. Fully enclosed operation does not require the construction of a domestic water tank, eliminating secondary pollution. Intelligent variable frequency voltage stabilization, energy-saving, quiet and easy installation, it is the preferred equipment for secondary water supply in high-rise residential buildings and commercial buildings.

: Constant pressure water supply equipment

Constant pressure water supply equipment is widely used in central air conditioning, floor heating, industrial closed-loop water circulation, and boiler systems. It integrates automatic pressure stabilization, automatic water replenishment, automatic exhaust, pressure relief and buffering functions. It stabilizes the pressure in the pipeline network, eliminates abnormal sounds caused by air blockage, and prevents damage from negative pressure and water shortage in the pipeline. It is an essential supporting equipment for HVAC and circulating water systems.