It is often used in water treatmentPEThe water tank is made of polyethylene materialIt hasIt is tough in texture and light in weight.Excellent corrosion resistance, Clean and beautiful ,Economical and durable,Heat and frost resistant,Odorless and in compliance with drinking water standardsIt is customizable and thus widely popular among all sectors. Let's talk about it belowPEInstallation and operation of the water tank8aPrecautions.

1,Foundation

InstallationPEThe cement ground foundation of the water tank should be level and capable of withstanding the corresponding load-bearing force. If it is used in an aerial steel structure, the gap should not be too large, and iron plates should be laid on top to keep it level and ensure safetyPEThe bottom surface of the storage tank is flat to increasePEService life of storage tanks.PEPlease remove any sharp objects or stones from the storage tank placement area. BecausePEWhen the storage tank is formed, it is inevitable that the bottom protrudes into the tank to form a spherical crown shape. Therefore, the foundation should be made into a spherical crown shape similar to the bottom shape.

2Control device

Plastic water tanks are universal containers, so float balls or other effective control devices should be installed to control the liquid level. When the liquid level cannot be controlled, an overflow outlet should be installed to prevent the liquid from overflowing through the manhole and causing unnecessary harm. Please do not respondPEIncrease the internal or external pressure of the storage tank. When the inflow and outflow of liquid are large, exhaust holes of corresponding flow rates should be configured.

3"Interface"

Each plastic water tank has three holes for water inlet, water outlet and sewage discharge.PEThe water tank openings and accessories are configured according to the uses provided by the customer, includingPE"Flange,PEInterfacePVC,ABSStainless steel, iron interfaces and other options are available. The feed and discharge ports for strong acids, strong alkalis and organic solvents are adoptedPEMaterial flange connection.

4Sealing property

PEThe storage tank has been equipped with joints at the factory and its strength is excellent. Plastic joints are tightened when leaving the factory. During transportation and handling, the joints may become loose. Therefore, before use, the sealing performance of the joints should be checked. Liquid can be added above the joint area to observe if there is any leakage. For holding chemical liquidsPEStorage tanks should be tested for leaks with water to prevent significant losses. Please note that the connector isPE,PVC,ABSOr finished products made of resins such as nylon, if tightened too much, may damage the threads.

5Pipeline

When the liquid inlet is relatively high from the bottom of the water tank, the inlet should be bent towards the tank wall to allow the incoming liquid to fall along the tank wall, reducing the impact on the bottom.PEThe external connection of the storage tank is correct.PEWater tankPEThe pipes connected by the lower joint or flange of the storage tank should be perpendicular to the tank wall. It is better to use flexible connections or shock absorbers.10More than cubicPEPlease equip the storage tank with reinforcing sleeves to prevent uneven expansion of the tank wall at the top and bottom when it is filled with liquid, which may damage the connection of the discharge port and cause leakage. In severe cases, it may damage the joint and the entire body, affecting the service life of the joint and the tank body.

6Leak detection

After the piping work is completed, please be sure to conduct a full water pressure test to confirm whether there is any leakage. If there is any leakage, please recheck whether the sealing part and the threaded part of the joint are correct and make further adjustments.

7Temperature

PEThe temperature of the solution in the storage tank is generally-20℃～60℃. If the temperature of the liquid being contained is higher than60℃At that time, a metal reinforcing sleeve should be configured to preventPEThe storage tank softens and deforms.

8,

15More than cubicPEFor storage tanks, metal reinforcing sleeves can be used to prevent cracking at the holes of the tank body. Large specificationPEWhen installing the storage tank, it is important to note that a crane should be used as much as possible

inPEWater tank/When installing heavy auxiliary equipment such as mixers on the bucket, or when people need to work on the top of the tank but the top cannot bear their weight, please make additional racks or ladders and pay attention to the operation.

PEWater tank andPEThe discharge port, interface, flange and flange ball valve of the storage tank should be inspected once every quarter. Any problems found should be dealt with promptly. Generally1-2It is replaced annually.

The above isPEInstallation and operation of the water tank8aPrecautions, if availablePEWater tankIn terms of selection, installation and useIf you have any questions, please consult Beijing Yuanlai Water Treatment Equipment Co., LTD., which focuses on the water treatment industry15In this year, you can trust us!