Regarding the softening exchange of water softening equipment

The workflow is roughly the same,The water softening equipment consists of five steps, which may vary due to different processes,Add or subtract some traditional processes. The requirements for different water qualities prepared.

Work(Sometimes it is called water production,The same below)Backwashing and salt absorption(Regeneration),Slow rinse(Displacement),Five quick cleaning processes. Almost all the work of different water softening equipment,It's just because of different needs or in the actual control process,

There might be some additional processes. Five processes developed on the basis of any sodium ion exchange water softening equipment(Among them,The automatic water softening equipment can increase the process of salt water replenishment).

salt(Renewable):

During the process of injecting brine into the resin tank,The traditional equipment uses salt to inject salt water into the pump, while the automatic equipment is a special built-in syringe that sucks in seawater(As long as there is a certain water pressure). In the actual process of work,The regeneration effect of physiological saline through resin at a slower rate is better than that of simply soaking the resin in physiological saline,Therefore,The water softening equipment adopts the method of slowly regenerating brine through resin,This process usually takes about30Minutes,The actual time is influenced by the salt.

Slow rinse(Displacement):

After passing through the brine resin,The raw water will be slowly rinsed with the resin at the same speed to remove all the salt. The cleaning process is slow,Because during this rinsing process, there is still a large amount of sodium ion exchange between calcium and magnesium ion functional groups,Based on practical experience,The process of regeneration is the main one,So many people refer to this process as substitution. This process is usually absorbed by salt simultaneously,That is to say,Approximately30Minutes.

Quick rinse:

In order to thoroughly wash away the remaining salt,A workflow that is close to reality should be used,Rinse the resin with raw water,The wastewater from this subsequent process should meet the standards of soft water. Generally speaking,Quick processing5 - 15Minutes. The application scope of water softening equipment is very wide,It can be used in fields such as hotels, apartments, and the pharmaceutical industry. The automatic water softener device designed by the water softening equipment manufacturer features a reasonable structure,Easy to install,Operation,The fact that it can be designed according to actual usage requirements has become an important reason for a water softening device in the market.