As we all know, the hardness of water is usually determined byCa2+andMg2+Chemical molecular composition: If the hardness of water is too high, it can easily cause a lot of scale to form in the boiler. If the scale keeps increasing, it is a very dangerous job and can easily cause the boiler to explode during operation, resulting in incalculable consequences. Boiler feed softened water equipment is mainly a type of softened water device produced for the easy formation of scale during the operation of boilers. It removes calcium and magnesium ions from water to prevent dangerous accidents such as boiler explosions.

　　The components of the boiler feed softened water equipment:

　　The single-valve double-tank boiler water softening equipment is a multi-way valve and regeneration control device component.

　　The multi-way valve is a multi-channel integrated valve application that switches the entire flow of soft water through the reciprocating motion of a piston. It is also equipped with a regeneration system, injection brine and sewage constraints, flow-limiting orifice plates and other components.

　　The control valve control unit of the playback control equipment, the controller and the driver composed of the reproduction equipment components. The regenerative controller sends the actuator action signal to the actuator to push the piston back and forth, and then ends the entire workflow of the softener. Assuming the activation form of the flow used for the regeneration of the water softener, they require a flow meter at the outlet of the water softener and a regeneration controller device for the flow signal.

　　Single-valve double-tank boiler softened water equipment, fully automatic control valve: mainly composed of8500,9000,9500The control valve is a double-tank control valve. A single valve simultaneously controls two resin tanks, ensuring a continuous supply of soft water. It uses a regenerated water softener, which has a good regeneration effect and is suitable for various water quality conditions. Heavy water systems can operate multiple units in parallel.

　　Regeneration system for single-valve double-tank boiler softened water equipment

　　The fully automatic soft water salt regeneration system consists of valves, air check valves, pipes and other components of salt. The salt is connected to the open or closed valve of the salt water pipeline through the rotating CAM connected to the injector to switch the gradually working process of salt washing and salt water tank absorption.

　　The single-valve double-tank boiler softening water equipment produced by our company is now widely used in various large-scale boiler operations. The product performance is stable, and at the same time, the market prospect of the product is very broad. It effectively solves the danger caused by excessive water hardness in boilers and promotes the stable development of boiler operations.

　　The steam boiler softening water equipment uses ion-exchange resin to adsorb calcium and magnesium ions in water. The water treated in this way is soft water. When installing the steam boiler softened water treatment equipment, many precautions need to be taken and certain requirements must be met. The specific equipment requirements for the steam boiler softening water equipment are as follows:

　　1, The pressure of the incoming water is0.2-0.5MPaThe inlet water pressure is insufficient and an additional pump needs to be used. Conversely, a pressure reducing valve is required for control.

　　2, The temperature of the incoming water is5-45℃Between them, the voltage is200V/50Hz.

　　3, It should be fixed on a horizontal platform and sufficient space should be left for maintenance.

　　4, The working environment is5-50℃Between them, the relative humidity should be less than95%.

　　The above is a detailed introduction to the soft water equipment for steam boilers. We hope it can be of some help to you. The water softening equipment of Beijing Yuanlai Water Treatment Company can not only serve as make-up water but also fundamentally prevent the occurrence of dangerous accidents. We have a team of dedicated engineering technicians who will provide you with focused processing plans based on your internship needs.

　　In life, water softening equipment has brought me a lot of convenience. Cleaning water with reduced hardness has more advantages. It can prevent scaling and pipe blockage that occur during long-term use, reducing economic losses. In addition, he also needs long-term maintenance and upkeep to extend the service life of the equipment. Now, let's have the editor share with us the maintenance methods during the operation of water softening equipment.

　　1Ensure the stability of voltage and current, prevent equipment from being burned out, and seal the electrical control equipment well to prevent water immersion and moisture.

　　2Add solid salt to the salt tank on time. Do not add iodine-rich salt. Be careful not to spill it into the salt well to prevent clogging the salt suction pipe. Regularly deal with the impurities at the bottom of the salt tank. Just rinse it with clean water until there are no impurities!

　　3The water softener should be disassembled and cleaned once a year. Remove impurities from the water distributor and the quartz sand pad layer, and check the consumption and communication of the resin. If there is severe aging, it should be replaced in time. For resin poisoned by iron, it can be revived with hydrochloric acid solution.

　　Beijing Yuanlai Water Treatment Company has been engaged in the production of water softening treatment equipment16I have been working in water treatment for many years. I have rich experience in soft water skills and after-sales service repair. I have cleaned up all kinds of equipment malfunctions and promptly and accurately handled all product questions for users. The satisfaction of our users is our recognition and the driving force for our progress. If you have any questions about the products, you can call us for consultation24We are at your service every hour!