Installation steps instructions for pure water equipment-Yuanlai Water Treatment

font: Big Middle Small

Installation steps instructions for pure water equipment

Released Date: Mar 24,2016 Article Source: Yuanlai Water Treatment

Pure water equipment mainly consists of a pretreatment device, a reverse osmosis main unit and post-treatment. The core technology of pure water equipment is reverse osmosis membrane separation technology. Through high-precision reverse osmosis membrane filtration, it can effectively remove harmful impurities such as colloids, suspended solids and viruses in the raw water. The water quality of the output can meet the national standard drinking water specifications. Below, Beijing Yuanlai Water Treatment Equipment Co., Ltd. will take a detailed look at the installation steps of pure water equipment. Installation steps for pure water equipment: 1. First, place the main unit of the pure water and the preprocessor of the pure water equipment in a location close to the water source and power supply. This will facilitate future use. 2. Then, in the pure water equipment, filter materials mainly for filtration, such as quartz sand, activated carbon, and softening resin, are installed. 3. Connect the waterway again: Pure

　　Installation steps instructions for pure water equipment

　　1First, we place the main unit of the pure water and the preprocessor of the pure water equipment in a location close to the water source and power supply, which is convenient for future use.

　　2Then, in the pure water equipment, filter materials mainly for filtration, such as quartz sand, activated carbon, and softening resin, are installed.

　　3Then connect the waterways: The inlet of the raw water pump of the pure water equipment should be carefully connected to the water source, and the outlet of the pre-filter should be connected to the inlet of the main unit. The drainage outlets of the pre-treatment unit and the main unit should both be connected to the sewer with pipelines.

　　4Circuit: The issue with this wiring is connecting the ground wire. This is one aspect that our electrical equipment needs to handle, and the power cord provided randomly should be connected to the room's electrical control box.

　　5After the pure water equipment is connected to the water source and power supply, and then the steps are operated step by step in accordance with the requirements of our "Pretreatment Operation Instructions". In this way, all our pretreatment debugging operations are completed.

　　6To use the pure water equipment, turn on the raw water pump switch, then set it to the automatic position and rotate the start-stop switch. Then connect the water source and power supply of our equipment. When the pressure at the multistage pump outlet reaches the set value of the pressure controller, the multistage pump of our equipment will start to work. After the multistage pump for pure water is started, the system pressure of the pure water equipment is1.0-1.2Mpa. Response at startupROThe membrane system is manually flushed30Minutes.

Keywords: Water Softening Equipment Automatic Water Softener Reverse Osmosis Equipment Manufacturer of Water Treatment Equipment

Prev : Barrel water filling machine equipment

Next : Recruitment information

Recommend products

: EDI ultra-pure water system

Yuan LaiEDIThe ultra-pure water equipment uses electro-deionization technology.EDIElectrodeionization is a water purification method that combines the dual advantages of electrodialysis and ion exchange. It does not require acid-base chemical regeneration and can continuously and stably prepare high-purity ultrapure water. Under the action of a direct current electric field, ion separation in water is completed. At the same time, water is electrolyzed to generate hydrogen ions and hydroxide ions, achieving automatic regeneration of the resin without the need to stop the machine for manual regeneration. The pre-treatment combined with reverse osmosis can prevent oxidized substances from damaging the resin, ensuring stable effluent quality and widely meeting the high-standard water usage requirements of various industries.

: Non-negative pressure water supply equipment

The non-negative pressure water supply equipment can be directly connected to the municipal water supply network, making full use of the residual pressure of the original network for superimposed water supply. Fully enclosed operation does not require the construction of a domestic water tank, eliminating secondary pollution. Intelligent variable frequency voltage stabilization, energy-saving, quiet and easy installation, it is the preferred equipment for secondary water supply in high-rise residential buildings and commercial buildings.

: Constant pressure water supply equipment

Constant pressure water supply equipment is widely used in central air conditioning, floor heating, industrial closed-loop water circulation, and boiler systems. It integrates automatic pressure stabilization, automatic water replenishment, automatic exhaust, pressure relief and buffering functions. It stabilizes the pressure in the pipeline network, eliminates abnormal sounds caused by air blockage, and prevents damage from negative pressure and water shortage in the pipeline. It is an essential supporting equipment for HVAC and circulating water systems.