The operation process of Beijing Yuanlai ultra-pure water EDI cleaning-Yuanlai Water Treatment

font: Big Middle Small

The operation process of Beijing Yuanlai ultra-pure water EDI cleaning

Released Date: Mar 29,2016 Article Source: Yuanlai Water Treatment

The EDI water treatment module is an important component of the ultrapure water device. The purity of the water produced is directly affected by the operating status of the EDI membrane block in the ionized water equipment. Therefore, regular maintenance and cleaning of the EDI membrane block should be carried out to ensure the long-term stable operation of the equipment. Overview of Beijing Yuanlai Ultra-Pure Water EDI Cleaning Operation Process: Independent Circulation Cleaning Procedure 1. Empty the cleaning system. 2. If the direct cleaning method is used, the EDI system cannot be emptied before starting the cleaning or between cleaning steps (if it has been working for more than one step). If the recirculation cleaning method is used, empty the EDI system before starting the cleaning or during the cleaning process (if it has been working for more than one step). 3. By closing the fresh water inlet, fresh water outlet, fresh water flushing outlet and concentrated water of the EDI system

　　EDIThe water treatment module is an important component of the ultrapure water device, and the purity of the water produced is directly affected by the ionized water equipmentEDIThe influence of the operating state of the membrane block, so it is correctEDIThe membrane blocks should be regularly maintained and cleaned to ensure the long-term stable operation of the equipment.

　　Beijing Yuanlai Ultrapure WaterEDIOverview of the cleaning operation process

　　Independent cycle cleaning program

　　1Empty the cleaning system.

　　2If the direct cleaning method is used, it is not allowed to empty before starting the cleaning or between cleaning steps EDISystem(If more than one step has been worked). If the recirculation cleaning method is used, empty it before starting the cleaning or during the cleaning processEDISystem(If more than one step has been worked).

　　3By closingEDIThe system's fresh water inlet, fresh water outlet, fresh water flushing outlet, concentrated water discharge, and extreme water outlet valves willEDIThe system is isolated from the upstream and downstream.

　　4Separate the concentrated water pipeline from the fresh water and extreme water pipelines by closing the isolation valve at the concentrated water inlet.

　　Beijing YuanlaiEDICleaning procedures for ultra-pure water treatment equipment

　　Cleaning procedure1:Concentrated water pipeline cleaning and.

　　Cleaning procedure2:Fresh water pipeline cleaning and.

　　Cleaning and Mode

　　1"Cleaning mode":Direct current, reverse current(Low and highpHIt's all worth it.);Recycling(Oxidizing agent).

　　2Optional cleaning mode:Recycling,Or through,"Go with the flow(Low and highpHIt's all worth it.).

　　Attention: Because hardness scaling almost occurs in the concentrated water chamber and the extreme water chamber, while it is lower in the fresh water chamberPHCleaning is not frequently used. Under conditions of severe scaling or extreme disorder, it is necessary to retain the low level of the fresh water chamberPHCleaning.

　　Cleaning procedure3:Extreme water pipeline cleaning and.

　　Cleaning and Mode

　　1Direct countercurrent(Low and highpHIt's all worth it.)Recycling(Oxidizing agent).

　　2Optional cleaning mode:Recycling,Or through,"Go with the flow(Low and high pHAny value is fine.

Keywords: Water Softening Equipment Automatic Water Softener Reverse Osmosis Equipment Manufacturer of Water Treatment Equipment

Prev : Overview of Kanpur EDI Water Treatment Equipment

Next : Barrel water filling machine equipment

Recommend products

: EDI ultra-pure water system

Yuan LaiEDIThe ultra-pure water equipment uses electro-deionization technology.EDIElectrodeionization is a water purification method that combines the dual advantages of electrodialysis and ion exchange. It does not require acid-base chemical regeneration and can continuously and stably prepare high-purity ultrapure water. Under the action of a direct current electric field, ion separation in water is completed. At the same time, water is electrolyzed to generate hydrogen ions and hydroxide ions, achieving automatic regeneration of the resin without the need to stop the machine for manual regeneration. The pre-treatment combined with reverse osmosis can prevent oxidized substances from damaging the resin, ensuring stable effluent quality and widely meeting the high-standard water usage requirements of various industries.

: Non-negative pressure water supply equipment

The non-negative pressure water supply equipment can be directly connected to the municipal water supply network, making full use of the residual pressure of the original network for superimposed water supply. Fully enclosed operation does not require the construction of a domestic water tank, eliminating secondary pollution. Intelligent variable frequency voltage stabilization, energy-saving, quiet and easy installation, it is the preferred equipment for secondary water supply in high-rise residential buildings and commercial buildings.

: Constant pressure water supply equipment

Constant pressure water supply equipment is widely used in central air conditioning, floor heating, industrial closed-loop water circulation, and boiler systems. It integrates automatic pressure stabilization, automatic water replenishment, automatic exhaust, pressure relief and buffering functions. It stabilizes the pressure in the pipeline network, eliminates abnormal sounds caused by air blockage, and prevents damage from negative pressure and water shortage in the pipeline. It is an essential supporting equipment for HVAC and circulating water systems.