08 Jan

Reverse osmosis flow chart

08 Jan

Manufacturing process of industrial pure water equipment

Pure water equipment manufacturing process: Pure water equipment process flow: First-stage reverse osmosis pure water process flow: raw water -; > Multi-media filter > Activated carbon filter > Softening filter > Softened water tank > Security filter > RO reverse osmosis system > Pure water tank > The process flow of the secondary reverse osmosis pure water at the water supply point: raw water - > Multi-media filter > Activated carbon filter > Softening filter > Softened water tank &md

07 Jan

Fully automatic water softening equipment solution

The working principle of the water softening equipment: The fully automatic sodium ion exchanger adopts the ion exchange principle to remove calcium, magnesium and other scale-forming ions in water. When the raw water containing hardness ions passes through the resin layer in the exchanger, the calcium and magnesium ions in the water are then exchanged with the sodium ions adsorbed by the resin. When the resin adsorbs the calcium and magnesium ions and the sodium ions enter the water, the water flowing out of the exchanger is softened water with the hardness removed. The hardness of water is mainly formed and represented by calcium and magnesium. Therefore, cation exchange resin (water softener) is generally used to replace Ca2+ and Mg2+(which are the main components of scale) in water. As the amount of Ca2+ and Mg2+ in the resin increases, the efficiency of the resin in removing Ca2+ and Mg2+ gradually decreases. When the resin absorbs a certain amount of calcium and magnesium ions

04 Jan

The main features of industrial boiler softened water equipment

The main features of industrial boiler softened water equipment are as follows: 1. High degree of full automation, stable water supply conditions, and long service life. The entire process operates automatically, requiring only regular manual salt addition. 2. High efficiency, low energy consumption, and low operating costs. Due to the reasonable overall design of this water softener, the exchange capacity of the resin is fully exerted. The energy consumption indicators of the equipment itself are significantly lower than those of general water softening equipment. The automatic control equipment does not require full-time operators, which brings many conveniences to users and generates good benefits. 3. The equipment has a compact structure, occupies a small area, and does not require a dedicated equipment foundation. It can be directly placed on a flat cement floor. 4. It is easy to use, with simple installation, debugging and operation. The control components are stable in performance, which can relieve users of their worries. 5. Corrosion-resistant and anti-corrosive

28 Dec

RO reverse osmosis equipment, reverse osmosis, pure water equipment

RO reverse osmosis equipment, reverse osmosis, pure water equipment, reverse osmosis technology Q&A 1. How often should the reverse osmosis pure water machine system be cleaned? Under normal circumstances, when the standardized flux decreases by 10 to 15%, or the system desalination rate drops by 10 to 15%, or the operating pressure and the pressure difference between sections increase by 10 to 15%, the RO system should be cleaned. The frequency of cleaning is directly related to the degree of system pretreatment. When SDI15 < 3, the cleaning frequency may be 4 times a year. When SDI15 is around 5, the cleaning frequency may need to be doubled, but the cleaning frequency depends on the actual situation of each project site. 2. What is SDI? At present, an effective and effective technique for evaluating the possible colloidal contamination in the influent of RO/NF systems is to measure the sediment density index (SDI) of the influent, also known as fouling