What is ultrafiltration?-Yuanlai Water Treatment

font: Big Middle Small

What is ultrafiltration?

Released Date: May 06,2015 Article Source: Yuanlai Water Treatment

Ultrafiltration in water treatment refers to a solution separation process driven by the pressure difference on both sides of the membrane and based on the principle of mechanical sieving. The operating pressure is usually 0.2-0.6MPa, and the separation pore size is 1nm-0.1μm. Ultrafiltration technology is widely used in the separation, concentration and purification of substances.

Ultrafiltration in water treatment refers to a solution separation process driven by the pressure difference across the membrane and based on the principle of mechanical sieving. The pressure used is usually0.2-0.6MPaSeparation pore size1nm-0.1μmUltrafiltration technology is widely applied in the separation, concentration and purification of substances. The ultrafiltration process involves no phase change and transformation, operates at room temperature, and is particularly suitable for the separation of heat-sensitive substances. It also has excellent heat resistance, acid and alkali resistance, and oxidation resistance, and can be used in60℃ BelowPHfor2-11It can be used continuously for a long time under certain conditions.

It should be noted that At present, almost all the ultrafiltration technologies adopted in China have no effect on removing inorganic calcium and magnesium ions dissolved in water. Therefore, the hardness of water after ultrafiltration hardly changes. This kind of water is only very clean water, but its chemical composition is not much different from that of tap water. Judging from the ion content, it is very unsuitable for direct drinking. If the hardness is relatively high, it is not suitable to be directly heated in equipment such as water heaters.

Technically speaking, the only physical methods that can remove hardness are nanofiltration andROReverse filtration.

Keywords: Water Softening Equipment Automatic Water Softener Reverse Osmosis Equipment Manufacturer of Water Treatment Equipment

Prev : What are the commonly used water treatment processes and equipment?

Recommend products

: EDI ultra-pure water system

Yuan LaiEDIThe ultra-pure water equipment uses electro-deionization technology.EDIElectrodeionization is a water purification method that combines the dual advantages of electrodialysis and ion exchange. It does not require acid-base chemical regeneration and can continuously and stably prepare high-purity ultrapure water. Under the action of a direct current electric field, ion separation in water is completed. At the same time, water is electrolyzed to generate hydrogen ions and hydroxide ions, achieving automatic regeneration of the resin without the need to stop the machine for manual regeneration. The pre-treatment combined with reverse osmosis can prevent oxidized substances from damaging the resin, ensuring stable effluent quality and widely meeting the high-standard water usage requirements of various industries.

: Non-negative pressure water supply equipment

The non-negative pressure water supply equipment can be directly connected to the municipal water supply network, making full use of the residual pressure of the original network for superimposed water supply. Fully enclosed operation does not require the construction of a domestic water tank, eliminating secondary pollution. Intelligent variable frequency voltage stabilization, energy-saving, quiet and easy installation, it is the preferred equipment for secondary water supply in high-rise residential buildings and commercial buildings.

: Constant pressure water supply equipment

Constant pressure water supply equipment is widely used in central air conditioning, floor heating, industrial closed-loop water circulation, and boiler systems. It integrates automatic pressure stabilization, automatic water replenishment, automatic exhaust, pressure relief and buffering functions. It stabilizes the pressure in the pipeline network, eliminates abnormal sounds caused by air blockage, and prevents damage from negative pressure and water shortage in the pipeline. It is an essential supporting equipment for HVAC and circulating water systems.