How to choose a metering pump?-Yuanlai Water Treatment

font: Big Middle Small

How to choose a metering pump?

Released Date: Aug 27,2015 Article Source: Yuanlai Water Treatment

The metering pump mainly consists of three parts: power drive, fluid transportation and regulation control. Metering pumps can be classified into motor-driven, electromagnetic driven and pneumatic types based on their power drive. According to the fluid transportation mode, they are classified into plunger pumps and diaphragm pumps. Diaphragm pumps are further divided into mechanical transmission diaphragm pumps and hydraulic transmission diaphragm pumps. Since the coagulants used in water treatment projects are mostly corrosive liquids, diaphragm pumps are often adopted. When choosing a metering pump, it is generally necessary to know the rated pressure, rated flow rate, type (diaphragm type or plunger type), and flow-through material. The rated pressure of a metering pump usually refers to the outlet pressure. When selecting a model, it is generally advisable to choose a rated pressure that exceeds the actual operating pressure by 10% to 20%. This not only saves resources and reduces costs but also improves the metering accuracy of the metering pump during actual use. When the metering pump is in operation, it is generally at a rated flow rate of 10

Since the coagulants used in water treatment projects are mostly corrosive liquids, diaphragm pumps are often adopted. When choosing a metering pump, it is generally necessary to know the rated pressure, rated flow rate, type (diaphragm type or plunger type), and flow-through material. The rated pressure of a metering pump generally refers to the outlet pressure. When selecting a model, it is usually chosen if the rated pressure exceeds the actual operating pressure10%~20%It is of the best quality, which can not only save resources and reduce costs, but also improve the metering accuracy of the metering pump in actual use. When a metering pump is in operation, it is generally at the rated flow rate10%~90%The measurement accuracy between them is relatively high. Therefore, when choosing the rated flow rate, it is generally selected that the rated flow rate should be equal to or slightly greater than the flow rate required by the process.

Keywords: Water Softening Equipment Automatic Water Softener Reverse Osmosis Equipment Manufacturer of Water Treatment Equipment

Prev : What is a bag filter?

Next : The principles for selecting water treatment processes in water treatment

Recommend products

: EDI ultra-pure water system

Yuan LaiEDIThe ultra-pure water equipment uses electro-deionization technology.EDIElectrodeionization is a water purification method that combines the dual advantages of electrodialysis and ion exchange. It does not require acid-base chemical regeneration and can continuously and stably prepare high-purity ultrapure water. Under the action of a direct current electric field, ion separation in water is completed. At the same time, water is electrolyzed to generate hydrogen ions and hydroxide ions, achieving automatic regeneration of the resin without the need to stop the machine for manual regeneration. The pre-treatment combined with reverse osmosis can prevent oxidized substances from damaging the resin, ensuring stable effluent quality and widely meeting the high-standard water usage requirements of various industries.

: Non-negative pressure water supply equipment

The non-negative pressure water supply equipment can be directly connected to the municipal water supply network, making full use of the residual pressure of the original network for superimposed water supply. Fully enclosed operation does not require the construction of a domestic water tank, eliminating secondary pollution. Intelligent variable frequency voltage stabilization, energy-saving, quiet and easy installation, it is the preferred equipment for secondary water supply in high-rise residential buildings and commercial buildings.

: Constant pressure water supply equipment

Constant pressure water supply equipment is widely used in central air conditioning, floor heating, industrial closed-loop water circulation, and boiler systems. It integrates automatic pressure stabilization, automatic water replenishment, automatic exhaust, pressure relief and buffering functions. It stabilizes the pressure in the pipeline network, eliminates abnormal sounds caused by air blockage, and prevents damage from negative pressure and water shortage in the pipeline. It is an essential supporting equipment for HVAC and circulating water systems.