Tips and methods for replacing softened water resin-Yuanlai Water Treatment

font: Big Middle Small

Tips and methods for replacing softened water resin

Released Date: Feb 19,2016 Article Source: Yuanlai Water Treatment

Remove the inlet and outlet water pipes, the sewage pipe, the salt suction pipe, and take off the control valve head! 2. Remove the pipe. If the tank diameter is greater than 500mm, there is no need to remove the pipe. 3. Use the siphon principle to remove the resin. 4. Install the pipe and block the top of the pipe with plastic sheeting to prevent the resin from flowing into the pipe. 5. Pour in the resin and install the control valve head. 6. Adjust the control valve to the backwash position (co-current regeneration) and supply a small amount of water to discharge the air in the resin tank. 7. Check for any leakage. The resin replacement is complete! 8. Beijing Yuanlai Water Treatment Co., Ltd. specializes in replacing softened water resin and repairing boiler softened water control valves

　　1Remove the inlet and outlet water pipes, the sewage pipe, the salt suction pipe, and take off the control valve head!

　　2Pull out the pipe if the diameter of the tank is greater than500mm Ze doesn't need to take out the tube

　　3Extract the resin by using the siphon principle

　　4Install the pipe and cover the top of the pipe with plastic sheeting to prevent the resin from flowing into the pipe

　　5Pour in the resin and install the control valve head.

　　6Adjust the control valve to the backwashing position (co-current regeneration) and supply a small amount of water to discharge the air in the resin tank.

　　7Check for any leakage. The resin replacement is complete!

　　8Beijing Yuanlai Water Treatment Co., Ltd. specializes in replacing softened water resin and repairing boiler softened water control valves

Keywords: Water Softening Equipment Automatic Water Softener Reverse Osmosis Equipment Manufacturer of Water Treatment Equipment

Prev : Water standards for the printing and dyeing industry

Next : Application characteristics of resin treatment for boiler softened water

Recommend products

: EDI ultra-pure water system

Yuan LaiEDIThe ultra-pure water equipment uses electro-deionization technology.EDIElectrodeionization is a water purification method that combines the dual advantages of electrodialysis and ion exchange. It does not require acid-base chemical regeneration and can continuously and stably prepare high-purity ultrapure water. Under the action of a direct current electric field, ion separation in water is completed. At the same time, water is electrolyzed to generate hydrogen ions and hydroxide ions, achieving automatic regeneration of the resin without the need to stop the machine for manual regeneration. The pre-treatment combined with reverse osmosis can prevent oxidized substances from damaging the resin, ensuring stable effluent quality and widely meeting the high-standard water usage requirements of various industries.

: Non-negative pressure water supply equipment

The non-negative pressure water supply equipment can be directly connected to the municipal water supply network, making full use of the residual pressure of the original network for superimposed water supply. Fully enclosed operation does not require the construction of a domestic water tank, eliminating secondary pollution. Intelligent variable frequency voltage stabilization, energy-saving, quiet and easy installation, it is the preferred equipment for secondary water supply in high-rise residential buildings and commercial buildings.

: Constant pressure water supply equipment

Constant pressure water supply equipment is widely used in central air conditioning, floor heating, industrial closed-loop water circulation, and boiler systems. It integrates automatic pressure stabilization, automatic water replenishment, automatic exhaust, pressure relief and buffering functions. It stabilizes the pressure in the pipeline network, eliminates abnormal sounds caused by air blockage, and prevents damage from negative pressure and water shortage in the pipeline. It is an essential supporting equipment for HVAC and circulating water systems.