Water softening equipment is also known as water softening devices, water softeners, water softeners, water softening equipment, and water quality softeners. He uses cation resin to soften the source water,The main purpose is to enable the cation resin to adsorb calcium and magnesium ions in water(The main components that form scale)It can reduce the hardness of the source water and carry out intelligent resin regeneration for recycling. Its main uses: softening and desalination, electronic descaling devices, filtration and separation, boiler softening, industrial softening equipment, softening devices, household tap water softening, etc. When reverse osmosis equipment is used to treat groundwater to produce pure water, a water softening device is also configured to fully remove calcium and magnesium ions from the water.

　　　The composition of the resin softening device

　　The resin softening device is a device that uses the principle of ion exchange to remove scale-forming ions such as calcium and magnesium from water. It is usually composed of a controller, a resin tank and a salt tank. Its controller can be an automatic flushing controller or a manual flushing controller. The automatic controller can automatically complete the entire cycle process of softening water, backwashing, regeneration, forward washing and automatic water replenishment for the salt tank. Resin tanks are available for selectionKaineng Huayu FRP tanksCarbon steel tanks or stainless steel tanks. The salt tank is mainly equipped with salt for the regeneration of resin cells and later.

　　Performance features

　　1, It has a good adsorption and filtration effect and occupies a small area

　　2, It is easy to use and manage, and has low operating costs

　　3, The filter material has a long service life

　　Why doesn't the water softener regenerate?

　　When the water softener does not regenerate, it may be one or more of the following situations:

　　1If the power supply to the device is interrupted, check whether the power supply is normal(It includes checking fuses, plugs and switches)

　　2The timer is damaged and needs to be replaced

　　3There is a power failure. The time needs to be reset

　　Ii. Why does a water softener convey hard water?

　　The reasons and solution steps are as follows:

　　1Open and close the bypass valve

　　2If there is no salt in the brine tank, add salt to it and keep the salt level higher than the water level

　　3Replace the jet injector and filter screen if they are clogged

　　4The hardness of the hot water tank requires repeated flushing of the hot water tank

　　5Replace the sealing ring, gasket and/or piston when the pipe is leaking

　　6Leakage inside the valve body ensures that the pipe has not broken. "CheckORing shape and flow guide pipe

　　　Why is there too much water in the brine tank?

　　Solution: It might be due to blockage caused by the sewage flow restriction. Clean the sewage flow restriction

　　Why doesn't the water softener draw salt water?

　　Fault analysis and handling

　　1If the sewage discharge is clogged, the jet injector can be cleaned and the filter screen replaced

　　2If the timer does not rotate, it can be replaced

　　3If there are foreign objects inside the salt suction valve, it can be cleaned or replaced

　　4If there are foreign objects in the sewage discharge flow, they can be cleaned and the sewage discharge flow can be controlled

　　The key components of the fully automatic water softening equipment produced by our company are made in the United StatesFLECKWith a multi-channel controller, the valve body is harmless and has a long service life. The tank body adoptsKaineng Huayu FRP resin tankStainless steel pressure vessels, softening resin adopts high-performance,Polite ion exchange resin. The product features stable performance, simple operation, energy conservation, high-quality water output and wide application range. The processing capacity of the product starts from0.25T/Hto100T/HThere are various models available for users to choose from, such as time-controlled type, flow-controlled type, and continuous water supply system type.