First, you need to provide the type of system that requires softened water: heating, cooling make-up water, process water, steam boilers, steel smelting industry, chemical and pharmaceutical industry?

Sodium ion exchanger system water usage time: that is, operating time, hourly water consumption, average value, peak value?

Does the water softening equipment need continuous water supply? If necessary, choose the dual-bed centralized control or dual-control dual-bed series; otherwise, the single-valve single-tank series can be selected.

Third: Total hardness of source water: The water source can be municipal tap water, groundwater, or surface water. You need to provide the total hardness of the raw water in the area of use. For a certain model of water softener, if the hardness of the raw water is high, the periodic water production volume will inevitably be relatively reduced, which leads to frequent regeneration of the water softener equipment. It relatively reduces the service life of the resin. To avoid such situations, the volume of the resin should be increased, which means choosing a larger model of water softener.

Our company's technical department provides the above parameters, and then we can more accurately select the softener that meets the requirements of your organization's system equipment.

If you are not familiar with the water quality of the water source you are using, you can entrust it to our company's analysis laboratory. We offer free routine water quality analysis.

Fourth: The required unit flow rate of soft water(Tons of/"Hour). This is determined by the nature and requirements of the user's equipment. We select a standard and reasonable model of water softener based on this.

Fifth: Setting of the periodic water production capacity

After the model of the water softener is set, the theoretical cycle water production can be determined based on the hardness of the raw water and the exchange working capacity of the resin used(Tons of).