Common faults of water softening equipment-Yuanlai Water Treatment

font: Big Middle Small

Common faults of water softening equipment

Released Date: Apr 21,2016 Article Source: Yuanlai Water Treatment

The reason why the water softening equipment does not produce soft water: The bypass valve is not opened. Solution: Open the bypass valve. Resin leakage. Solution: Check whether the resin tank is damaged to ensure its integrity. Solution for insufficient salt in the salt tank: Check if there is enough salt in the salt tank and add salt to the severe case. Solution to resin failure: Resin failure may be caused by regeneration failure. Regenerate the resin again. Cause of low water pressure: Clogged inlet pipe. Solution: Clean and unclog the inlet pipe or replace it. Solution for a broken water pipe: Inspect the water pipe and replace the broken one. Solution to water valve leakage: Check the water valve to ensure it is functioning properly to prevent leakage from affecting water pressure. The water softening equipment is not in operation

　　Softened water equipment does not produce softened water

　　Reason: The bypass valve is not open

　　Solution: Open the bypass valve

　　Resin leakage

　　Solution: Check if the resin tank is damaged to ensure its integrity.

　　There is not enough salt in the salt tank

　　Solution: Check if there is enough salt in the salt tank and add salt to the severely affected area.

　　Resin failure

　　Solution: Resin failure may be caused by regeneration failure. Regenerate the resin again.

　　Low water pressure

　　Reason: The water inlet pipe is clogged

　　Solution: Clean and unclog the water inlet pipe or replace it.

　　The water pipe is broken.

　　Solution: Inspect the water pipes and replace the cracked ones.

　　The water valve is leaking.

　　Solution: Check the water valve to ensure it is functioning properly to prevent water leakage from affecting water pressure.

　　The water softening equipment is not in operation

　　Cause: Power system failure

　　Solution: Check the power supply system to ensure that the water softening equipment can be powered on normally.

　　Controller setting issue

　　Solution: Reset the controller to ensure that the controlled devices are correct.

Keywords: Water Softening Equipment Automatic Water Softener Reverse Osmosis Equipment Manufacturer of Water Treatment Equipment

Prev : The reasons for the increase in the conductivity of purified water

Next : The difference between softened water and other types of water

Recommend products

: EDI ultra-pure water system

Yuan LaiEDIThe ultra-pure water equipment uses electro-deionization technology.EDIElectrodeionization is a water purification method that combines the dual advantages of electrodialysis and ion exchange. It does not require acid-base chemical regeneration and can continuously and stably prepare high-purity ultrapure water. Under the action of a direct current electric field, ion separation in water is completed. At the same time, water is electrolyzed to generate hydrogen ions and hydroxide ions, achieving automatic regeneration of the resin without the need to stop the machine for manual regeneration. The pre-treatment combined with reverse osmosis can prevent oxidized substances from damaging the resin, ensuring stable effluent quality and widely meeting the high-standard water usage requirements of various industries.

: Non-negative pressure water supply equipment

The non-negative pressure water supply equipment can be directly connected to the municipal water supply network, making full use of the residual pressure of the original network for superimposed water supply. Fully enclosed operation does not require the construction of a domestic water tank, eliminating secondary pollution. Intelligent variable frequency voltage stabilization, energy-saving, quiet and easy installation, it is the preferred equipment for secondary water supply in high-rise residential buildings and commercial buildings.

: Constant pressure water supply equipment

Constant pressure water supply equipment is widely used in central air conditioning, floor heating, industrial closed-loop water circulation, and boiler systems. It integrates automatic pressure stabilization, automatic water replenishment, automatic exhaust, pressure relief and buffering functions. It stabilizes the pressure in the pipeline network, eliminates abnormal sounds caused by air blockage, and prevents damage from negative pressure and water shortage in the pipeline. It is an essential supporting equipment for HVAC and circulating water systems.