With the improvement of living standards, more and more families choose to secretly switch to household water purifiers. Among them, the filter core is the core component of the equipment, which directly affects the water quality of the output. To use it reasonably, let's talk about how to maintain household water purifiers below?

1After using a water purifier for a long time, it is necessary to flush it frequently. This can effectively extend the service life of the water purifier.

2If the tap water supply is cut off, remember to first open the drain valve to completely remove the sediment, rust and other impurities in the tap water pipe, and then open the purified water to use the purified water.

3Long-term use of water purifiers will gradually reduce their water output, but the quality of the produced water remains qualified and can be used with confidence.

4Sometimes we have to go on long trips. If the water purifier is not used for more than three days, it should be repeatedly flushed forward when used again2-5It takes minutes until all the water in the water purifier is drained.

5When the water purifier malfunctions, please immediately close the tap water inlet valve to cut off the water supply to the water purifier. Do not disassemble it by yourself.

6After using the water purifier, the ultrafiltration membrane filter core should always be kept in a moist state. If the ultrafiltration membrane filter element dries out, it will cause a sharp drop in water production that cannot be restored.

7The total water output of a water purifier is related to the quality of the water entering the purifier. If the quality of the water entering the purifier is good, the total water output will increase; conversely, if the quality of the water entering the purifier is poor, the total water output will decrease, and the service life of the filter core will be slightly shorter accordingly.

Note

The filtration effect and function of water purification product filter cores vary depending on the raw materials used. The common ones mainly include physical barrier filtration and adsorption functions, such asPPCotton filter element and activated carbon filter element.

As the usage time increases, impurities in the water will clog the filter element, and the activated carbon filter element will reach adsorption saturation. Generally speakingPPFilter element3The activated carbon filter element needs to be replaced every month6It needs to be replaced every month. Neither of these two types of filter elements can effectively remove organic contamination microorganisms. It is not easy to detect after saturation failure. The filtration accuracy can all be achieved0.1-0.01umIt can effectively filter out harmful substances. The water filtered by the water purification products using these two types of filter cores can be drunk directly. Hollow fibers, which cannot be cleaned, are generally placed inPPCotton and activated carbon are used at the back end; otherwise, they are prone to clogging. They are generally used as the end of water purification equipment1-2It needs to be replaced every year.

The above is all the information about how to maintain household water purifiers. If you have any questions regarding purchase and maintenance, please consult Beijing Yuanlai Water Treatment Equipment Co., LTD.15We have been dedicated to water treatment for years and are worthy of your trust!