There are several methods for treating hard water, including chemical treatment (silicon phosphorus crystal), water softening treatment (ion exchange), electromagnetic water treatment and reverse osmosis equipment treatment.

I. The following is the primary introduction to the chemical treatment method, that is, the (silicon phosphorus crystal) treatment method.

1Silicon phosphorus crystal is an economical and effective water treatment agent used to protect the pipelines of domestic drinking water and industrial water systems. It adopts controlled release technology and is widely applied in the anti-corrosion and scale inhibition treatment of domestic hot water.

2Main components

Silicon phosphorus crystals are composed of soda﹑Phosphoric acid﹑The active ingredient raw materials such as calcium carbonate are in1200-1700℃The glass-like small balls are fired by high-temperature technology, and during the firing process, mineral elements such as calcium, zinc and magnesium that the human body needs daily are added. Water treated with common silicon-phosphorus crystals is a good way for the human body to naturally supplement minerals. Silicon phosphorus crystals play a positive role in anti-corrosion, scale inhibition and extending the service life of equipment in industrial water systems, bringing intangible economic benefits.

3Instructions for Use

The operation method of using silicon phosphorus crystal is very simple. First, put it into the medicine tank, then connect the water source. The medicine in the tank will undergo Brownian motion due to the impact of water flow. At this time, the medicine slowly dissolves in the water and can normally exert its pharmacological effect.

"Silicon-phosphorus crystal"The water treatment technology is different from other water treatment chemicals and equipment currently available in the domestic market. This technology is applicable to domestic water systems, integrating the prevention of secondary water pollution with the protection of water-using equipment. It can not only solve the problem"Yellow water","Red water"This can prevent corrosion of pipelines and equipment and also suppress scaling during the heating process.

4Scope of application

This silicon-phosphorus crystal can be widely applied in domestic hot water, drinking water systems, heat exchangers and boiler make-up water systems, industrial circulating water and make-up water systems.

5Product advantages

Convenient to use:It has no power consumption, does not increase the resistance of the water system, and does not require dedicated maintenance on a regular basis. Only3-6Add it once a month"Silicon-phosphorus crystal".

Ii. Softened Water Treatment (ion exchange) Method

1Ion exchange water softeners are mainly dominated by domestic control valves, imported Fleck control valves and other fully automatic water softening control valves of domestic and foreign brands.

2Working principle

The hardness of water mainly depends on the cations in it:calcium(Ca)Magnesium(Mg)Ionic composition. When the raw water with hardness passes through the resin layer of the exchanger, calcium and magnesium ions in the water are adsorbed by the resin, while sodium ions are released. The water flowing out of the exchanger in this way is softened water with the hardness ions removed. When the resin that adsorbs calcium and magnesium ions reaches a certain level, the hardness of the effluent increases. At this point, the water softener automatically performs the regeneration of the exhausted resin according to the predetermined program, using a higher concentration of sodium chloride solution to pass through the resin, so that the exhausted resin is restored to the sodium type resin.

3Application scope

Industrial boilers, air conditioners, heat exchangers, hotels and restaurants, chemical industry, laundry and dyeing, hygiene and other industries.

4Main features

High degree of automation The fully automatic water softening device automatically completes the softening and regeneration cycle processes according to the pre-set program. During operation, apart from the need for regular manual addition of regeneration salt, no manual operation is required, thus saving a great deal of manpower and material resources. The automatic controllers or computer automatic controllers we provide(Optional)It enables users to easily adjust the operation of the system according to changes in water quality.

The effluent quality is stable. Produced by Yuanlai Water Treatment CompanyYLThe soft water device precisely sets the program based on the local water quality conditions, ensuring the quality of the water output under any working conditions.

High efficiency, low energy consumption and low operating costs Due to the overall reasonable design of the water softener and the implementation of strict automatic control, the exchange capacity of the resin is guaranteed to be fully exerted. As a result, the salt consumption, water consumption and other indicators of the equipment are significantly lower than those of general water softening devices, and the power consumption is significantly reduced.

Reliable operation and long service life DMThe exchanger shell of the soft water device is made of high-strength special fiberglass reinforced plastic and composite materials, which are corrosion-resistant, anti-aging, and have an effective service life of up to50In the year, the structural design of the fully automatic control valve consists of the valve core as the moving part. These features make the performance of the control valve reliable and its service life long.

It occupies a small area. The process design makes the soft water device have a compact structure, significantly reduces the occupied area, and saves construction investment.