Interpretation of the Causes of edi Device Accessories and Membrane Stack blockage-Yuanlai Water Treatment

font: Big Middle Small

Interpretation of the Causes of edi Device Accessories and Membrane Stack blockage

Released Date: May 13,2019 Article Source: Yuanlai Water Treatment

The edi device is simpler to operate and more stable in operation than the traditional mixed bed technology. Moreover, it uses relatively fewer auxiliary accessories, such as PH neutralization devices and acid-base metering devices. It generates very little excess emission substances throughout the entire process, and these substances meet the emission standards and do not require further treatment. The accessory parts used in the edi device: 1. Highly stable power supply equipment: Effectively maintains the stability of the entire system to provide a stable current to the system, and the current does not change in any way with the quality of the incoming water. 2. System flow control equipment: To ensure the stable operation of the module, when there is no water entering the module, the power supply of the module should be immediately turned off. 3. Pressure gauges: Pressure gauges are installed at the inlet water end, product water end and concentrated water end to measure the inlet water pressure. 4. Inlet and outlet flow meters: Facilitate the adjustment of water production rate

ediThe device is simpler to operate and more stable in operation than the traditional mixed bed technology, and it also uses relatively fewer accessory parts, such as:PHNeutralization devices, acid-base metering devices, etc. It generates very little excess emission substances throughout the entire process, and these substances meet the emission standards and do not require further treatment.

ediAccessory parts used by the device

1,Highly stable power supply equipment: Effectively maintains the stability of the entire system to provide a stable current to the system, while the current does not change in any way with the quality of the incoming water.

2System flow control equipment: To ensure the stable operation of the module, when there is no water entering the module, the power supply of the module should be immediately turned off.

3Pressure gauges: Pressure gauges are installed at the inlet water end, product water end and concentrated water end to measure the inlet water pressure.

4Inlet and outlet flow meters: They are convenient for adjusting the water production rate and can be used as flow switches.

5,PLCSystem control: When no water enters the system, it can automatically cut off the power supply. It can also control the inflow of water into the system for a period of time. If there is no power supply, the water flow into the equipment should be immediately stopped. Stop30Seconds later, the power supply is still off. At this point, the pump needs to be turned off to avoid itediThe resin in the device becomes saturated, affecting the quality of the effluent.

ediThe main reasons for the clogging of the device membrane block

1, A large number of particles and colloids cause membrane block fouling.

2, Inorganic substances cause membrane block contamination and blockage.

3, Caused by organic matterediThe membrane block is clogged.

4, Caused by microorganismsediThe membrane block is clogged.

ediThe device is the core component of the ultrapure water equipment. It mainly filters out tiny pollutants in water through electro-deionization to increase the water's resistivity.

Keywords: Water Softening Equipment Automatic Water Softener Reverse Osmosis Equipment Manufacturer of Water Treatment Equipment

Prev : What are the common process flows of deionized water equipment?

Next : Can Dow FILMTECTM membrane elements be used for concentrating or purifying organic solvents?

Recommend products

: EDI ultra-pure water system

Yuan LaiEDIThe ultra-pure water equipment uses electro-deionization technology.EDIElectrodeionization is a water purification method that combines the dual advantages of electrodialysis and ion exchange. It does not require acid-base chemical regeneration and can continuously and stably prepare high-purity ultrapure water. Under the action of a direct current electric field, ion separation in water is completed. At the same time, water is electrolyzed to generate hydrogen ions and hydroxide ions, achieving automatic regeneration of the resin without the need to stop the machine for manual regeneration. The pre-treatment combined with reverse osmosis can prevent oxidized substances from damaging the resin, ensuring stable effluent quality and widely meeting the high-standard water usage requirements of various industries.

: Non-negative pressure water supply equipment

The non-negative pressure water supply equipment can be directly connected to the municipal water supply network, making full use of the residual pressure of the original network for superimposed water supply. Fully enclosed operation does not require the construction of a domestic water tank, eliminating secondary pollution. Intelligent variable frequency voltage stabilization, energy-saving, quiet and easy installation, it is the preferred equipment for secondary water supply in high-rise residential buildings and commercial buildings.

: Constant pressure water supply equipment

Constant pressure water supply equipment is widely used in central air conditioning, floor heating, industrial closed-loop water circulation, and boiler systems. It integrates automatic pressure stabilization, automatic water replenishment, automatic exhaust, pressure relief and buffering functions. It stabilizes the pressure in the pipeline network, eliminates abnormal sounds caused by air blockage, and prevents damage from negative pressure and water shortage in the pipeline. It is an essential supporting equipment for HVAC and circulating water systems.