Bookmark this site Online message 中文站Welcome to the official website of Beijing Yuanlai Water Treatment Equipment Co., LTD.!
Service Hotline
+86 010 59792055 / +86 13910114728
FRP softening tanks, water treatment tanks, boiler softening water tanks, resin tanks
1 Product Introduction Structure and Material ● Inner Lining Material: Rotational molding or blow molding in one piece, seamless and spliced PE inner liner. ● Outer layer winding: Reinforced glass fiber and high-performance epoxy resin ● Tank mouth: 2.5, 4 engineering plastic threaded interface, 6" Aluminum alloy flange interface ● Base material: fiberglass reinforced plastic or reinforced PP Application conditions ● Working pressure: 150psi (10.5bar) ● Working temperature: 1-49℃ (34-121 ° C) F) ● Vacuum degree: 127mmHg● Low storage and transportation temperature: -27℃ (-17 ° C) F) Design Parameters ● Burst pressure: 42bar(4 times) ● Fatigue Cycle: 100,000 times 2 Product Display 3 Product Specifications The water treatment tank has passed the high-standard burst pressure test
Details >Working procedures and performance characteristics of boiler softened water equipment
Working procedure and performance characteristics of boiler softened water equipment: 1. Water supply: Untreated water passes through the resin layer. An exchange reaction occurs. Produce soft water. 2. Backwashing: Water enters from the bottom of the resin layer. "Loose resin" Remove the fine debris. 3. Regeneration with brine: Utilize a higher concentration of brine to flow through the resin. Restore the exhausted resin to the sodium form of usable resin. 4. Rinsing: Follow the water supply process to pass water through the resin to wash away the excess brine and the calcium and magnesium ions exchanged during regeneration. 5. Filling water: Filling water into the salt tank. Dissolve salt For the next regeneration. The performance of the boiler water softening equipment
Details >The principle of water softening equipment and automatic control scheme
The principle of water softening equipment and automatic control scheme: Fully automatic water softening equipment features small size, simple operation, and automatic operation without manual intervention. It has been widely applied in industrial boilers, cooling circulating water, steelmaking, steel rolling, large transformers, and civil hot water boilers, among other fields. The standard working process of fully automatic water softening equipment mainly includes five steps: water softening equipment operation (sometimes called water production, the same below), backwashing, salt absorption (regeneration), slow rinsing (replacement), and fast rinsing. All the processes of different water softening equipment are very similar. However, due to the differences in the actual processes of the water softening equipment or the requirements of control, there may be some additional procedures. Any water softening equipment based on sodium ion exchange is developed on the basis of these five processes (among which, fully automatic softening
Details >Reverse osmosis technology for pure water equipment in water treatment
The pure water equipment mainly adopts reverse osmosis membrane technology. Its working principle is to apply a certain pressure to water, allowing water molecules and ionic mineral elements to pass through the reverse osmosis membrane, while the vast majority of inorganic salts (including heavy metals), organic substances, viruses, etc. dissolved in water cannot pass through the reverse osmosis membrane, thus strictly separating the permeated pure water from the concentrated water that cannot permeate. The pore size of reverse osmosis membranes is only 0.0001 microns, while the diameter of viruses is generally 0.02 to 0.4 microns, and the common diameter is 0.4 to 1 micron. Reverse osmosis (RO) technology is the most energy-efficient and effective membrane separation technology nowadays. The principle is that under the effect of pressure higher than the osmotic pressure of the solution, these substances and water are separated because other substances cannot pass through the semi-permeable membrane. Due to the membrane pores of the reverse osmosis membrane
Details >1. In the water treatment system, the tank is used to fill fillers. The water supply reacts with the fillers and serves as a container for holding water. It needs to have a certain pressure-bearing capacity. Materials include carbon steel, stainless steel, plastic, fiberglass reinforced plastic, etc. The selection is based on the water flow rate and exchange capacity required by the customer. 1. Carbon steel tank: Different types of steel plates, rubber-lined and plastic-lined. 2. Stainless steel tanks: 304, 316, 316L, rubber-lined, plastic-lined. 3. Plastic cans: Acrylic glass, PP plastic, PE plastic. 4. FRP tanks: hand-laid inner tanks, PE inner tanks. Ii. FRP Tank Series: HY Small Tank Series (Diameter 8 "-16", civil series) Inner lining: PE plastic blow-molded inner liner formed
Details >
Yuan LaiEDIThe ultra-pure water equipment uses electro-deionization technology.EDIElectrodeionization is a water purification method that combines the dual advantages of electrodialysis and ion exchange. It does not require acid-base chemical regeneration and can continuously and stably prepare high-purity ultrapure water. Under the action of a direct current electric field, ion separation in water is completed. At the same time, water is electrolyzed to generate hydrogen ions and hydroxide ions, achieving automatic regeneration of the resin without the need to stop the machine for manual regeneration. The pre-treatment combined with reverse osmosis can prevent oxidized substances from damaging the resin, ensuring stable effluent quality and widely meeting the high-standard water usage requirements of various industries.
The non-negative pressure water supply equipment can be directly connected to the municipal water supply network, making full use of the residual pressure of the original network for superimposed water supply. Fully enclosed operation does not require the construction of a domestic water tank, eliminating secondary pollution. Intelligent variable frequency voltage stabilization, energy-saving, quiet and easy installation, it is the preferred equipment for secondary water supply in high-rise residential buildings and commercial buildings.
Constant pressure water supply equipment is widely used in central air conditioning, floor heating, industrial closed-loop water circulation, and boiler systems. It integrates automatic pressure stabilization, automatic water replenishment, automatic exhaust, pressure relief and buffering functions. It stabilizes the pressure in the pipeline network, eliminates abnormal sounds caused by air blockage, and prevents damage from negative pressure and water shortage in the pipeline. It is an essential supporting equipment for HVAC and circulating water systems.
Landline：+86 010 59792055
Landline：+86 010 63780188
Mobile：+86 13910114728
Email：bjyuanlai@163.com
Email：Wanda Plaza, Fengke Road, Fengtai District, BeijingBseat6Courtyard No.3Building No.7layer708
Yuanlai Homepage Softened water equipment Reverse osmosis pure water equipment Water supply equipment Engineering case Technical service Enter Yuanlai Site map
Softened water equipment Reverse osmosis pure water equipment Water purification equipment Water supply equipment Automatic dosing equipment High-purity water (ultra-pure water) equipment Wholesale of water treatment accessories
Electric power industry Petrochemical industry The electronic semiconductor industry The photovoltaic new energy industry Pharmaceuticals & Biochemical Engineering School research units Food and beverage industry Enterprises and public institutions
Reverse osmosis membrane Star-counting pump Fleck Valve Runxin Valve Instruments and meters Ultrafiltration membrane Softening resin Resin tank
